Ghost 2 Immobiliser Problems
Created to guard vehicles from key cloning and hacking The Ghost 2 immobiliser is a discreet device that can be fitted without damaging your vehicle. It stops your vehicle from starting unless you press the correct sequence of buttons within your vehicle similar to a password on the phone.
Stop/Start
Ghost Immobilisers protect vehicles from being stolen by preventing the engine from starting until it has the correct PIN code. This is done without modifications to the vehicle and is completely undetectable by thieves. The unit connects directly to the ECU through the CAN databus in order to disable a vehicle. This system is similar to the one that automobile manufacturers have been using in their cars for many years, however, the thief cannot add a new key or utilize key relay technology to bypass it as they can with factory fitted systems.
Ghost is compatible with any vehicle that has an engine, which includes motorhomes, vans, cars and caravans, as well as bikes. The same system can also be utilized on electric vehicles. It's an excellent alternative to wheel clamps and steering wheel locks.
When the Ghost is activated, it will block all the buttons in your vehicle and prevent the ignition from starting without a PIN code having been entered prior to. This can be done using the Android or Apple mobile app or by entering the code through your key fob. If a code that is incorrectly entered the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great method to deter thieves. If the vehicle cannot be started the thieves will be able to move on.
The Ghost is a small, weatherproof device that can be concealed in the most difficult to reach areas of your car. It is incredibly easy to install and takes an average of 20-30 minutes per vehicle. It is also easy to remove if you choose to switch vehicles, or even give it to a service center or valet parking. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is recognised by a number of insurance companies. It also features a secure emergency Pin Code Override, and the Service/Valet feature that can be activated by pressing a button within the app or using your key fob.
auto ghost immobiliser to the mechanical devices, which can be removed Ghost immobilisers are hidden and are integrated into the car. Even if they were found and stolen, thieves would not be able start the car. They are virtually impossible to bypass or hack. A ghost immobiliser is protected from key cloning as well as devices spoofing signals and signal jamming. These are techniques thieves employ to gain access into cars with standard immobilisers.
An immobiliser works by sending an instruction to the ECU (electronic control unit). If a wrong code has been received and the vehicle does not start because the engine will not fire up. It is possible to disable a ghost immobiliser with the aid of a software program, however it is very difficult and time consuming to accomplish this. Only an authorised installer can install and use the software.
The Ghost immobiliser is a tiny system that sits within the vehicles wiring loom and is invisible to the naked eye after it has been installed. It doesn't show up on diagnostic systems. There are no LED indicators and it does not communicate with the engine through the OBD port. It communicates in silence through the CAN data loop.
The system will prevent the vehicle from starting unless it is able to receive a user-defined PIN code sequence. The code is entered by pressing buttons on the steering wheel, door panels, or centre console. This is a better way to protect the car, since it doesn't require the use of a remote or key fob.
Ghost also has a service-mode that is activated through the mobile application. This lets you hand over your keys to someone else to use for valet parking or service without needing to enter an arm-disarm sequence.
If your Ghost is in service mode or not, you should never attempt to remove the system yourself because it could affect your engine and cause damage. It is recommended to speak with a TASSA certified installer who can remove the system safely and correctly. Our most recent GHOST immobilisers include a special fingerprint QR sticker that is hidden in various parts of your vehicle. They are connected to our security register. In the event that the system is removed and then sold on the blackmarket, this will allow you to trace the original owner.
Anti-Hijack
Ghost Immobiliser 2 has a extremely useful anti-hijack feature. This system functions as smart keys and is among the most secure ways to protect your vehicle from thieves. The Ghost system will automatically activate the hazard light and stop the engine when the ignition is on and the vehicle is in a stationary position. This gives the driver and passengers time to press the hidden security button before the system is activated.
The Ghost system, unlike other competitors, utilizes a timer and controller unit that shuts off the valve for shut-off of fuel 14 after a predetermined period of time. This is regardless of whether the ignition is on. The delay time must be sufficient to allow the person who was hijacked to drive away and a distance sufficient from the car that it is stuck before the system is activated.
In addition to the standard CANbus immobiliser blocking capabilities of the Ghost, it has an additional security level that blocks common methods of hacking that are used to hack into modern vehicles, such as relay attacks key range extending, key range hacking and ECU swapping. This is because the Ghost system is completely silent and does not emit any signals that could be detected by a criminal using codes or RF scanning technology.
The Ghost system also features the Service/Valet mode that allows your vehicle to be temporarily started and driven without the requirement of an PIN code. This is perfect if you are parking your vehicle and need to leave it for a brief period of time, for example, to store groceries in the boot or open a garage door. The system will end the service mode based on speed and time or through the simple input of a PIN code process. This gives you complete security that only YOU are able to drive your vehicle!
Keyless Entry
With the growing trend in car thefts that are not involving contact Many customers are seeking out additional security options. This is particularly true for those who have invested time or money to personalize their vehicle and own rare/expensive vehicles. An add-on immobiliser can be an affordable method to stop this kind of theft because it will stop your vehicle from starting until the right pin code is entered into your key fob.
Immobilisers are designed to be used on different vehicle circuits, including those that control starter motors and fuel pumps. They can also shut off the car alarm to attract attention and scare away potential thieves.
These devices communicate directly with the engine control unit using the CAN data network and prevent the thief from bypassing it by installing a replacement ECU or using key programmers. The immobilisers are fitted discreetly and leave no marks on your vehicle. They are also unnoticeable by sophisticated tools used by thieves.
The Ghost immobiliser is unlike other systems which require drivers to carry tags or an app. Instead, you can select your personal pin sequence by pressing the pattern on your steering, door panel, or centre console. The pin can easily be changed and makes the device as secure as a credit card. It's also more difficult to break since it requires as many as 20 press.
Ghost also comes with a Valet/Service mode that allows you to disable it if you are going to give your vehicle to valet parking, or service. This allows the system to operate within parameters, such as a 30-mph speed limit. It can then be reactivated using the original key or key that corresponds to the entry code.
This makes it the most efficient and secure aftermarket CAN immobiliser available on the market, and is insurance approved by Thatcham as an optional accessory for your car when installed by one of our authorised installers. The Ghost 2 immobiliser is also supplied with six QR fingerprint labels, an ISR contact card containing your unique QR code and an emergency code that is secure, all of which are kept in your purse or wallet of your vehicle.